OPERATION: Drive over the scale while moving at a constant 3-5km/h. The scale will automatically weigh each axle and print a receipt with individual axle weights and the total. If you store the trucks ID and tare weight, or use 2 pass weighing, the controller will calculate the Gross, Tare and Net values.

EASY: Just install, add power, zero the scale and start weighing. The axleWEIGHr is preconfigured for easy installation. The load cells are factory calibrated and the indicator is preprogrammed. All wiring is DIY terminating with screw on watertight M12 connectors.

ACCURATE: On average better than ± 0.5% repeatability can be expected. Company testing as well as numerous field installs have shown that with extended flat and level concrete approaches better accuracy can be achieved. Individual results may vary. Well maintained vehicles weigh the best. Never worry about being overloaded again.

ECONOMICAL: About 1/3 of the cost of a full length truck scale. With the axleWEIGHr you will always know the total vehicle weight and the individual axle weights. Installation generally in half a day and no costly foundations. No limit on the number of axles, allows for any truck configuration or length. Can even be installed in a gravel driveway removing the need for costly approaches and exits.

Prices start at $23,950